SmartBridges sB3416-02 User Manual download pdf (Page 70)

Page 70 of 74

intelligent wireless platform

airClient™ TOTAL 3416 User Guide

5.11. System Log

sB3416 allows the System logs to be created locally or remotely on the PC connected to the unit. Local

logging is persistent across resets of the 3416-01/02/03 units.

To configure the System Log on the 3416 device, follow the steps below:

1. From the top navigation menu bar, click on Tools | System Log. The System Log web page will

appear as shown below in Fig 5-13.

2. By default, the Syslog level is set to Information. This can be changed to Warning, Information or

Debug levels, depending on the amount of information that needs to be logged by the unit.

3. Click on Enable Local System Log to enable logging locally on the 3416 unit. You can configure

the settings to Stop Logging, to stop logging when the buffer is full, or Auto Delete to reuse the

same buffer, when it gets full.

4. Click on Enable Remote System Log to enable logging on the PC connected to the 3416-

01/02/03 unit, to allow for remote logging. Enter the Server IP to the IP address of the PC, and

the Server port to the port setting of Syslog server running on the PC.

5. Click Save to save the settings.

Figure 5-13 airClient TOTAL System Log

1 2 ... 65 66 67 68 69 70 71 72 73 74

No comments

SmartBridges sB3416-02 User Manual Page 70